Husqvarna FS 700 EX Bedienungsanweisung Seite 62

What is what
1. Trolley feed lever
The machine's propulsion is controlled using this lever.
The machine is driven forwards by turning the lever
clockwise. When the lever is turned anticlockwise, the
machine reverses. When lever is in the neutral position
the machine stands still. This function works as soon
as the machine is connected to the power and the
machine's propulsion is engaged.
2. Blade feed lever
This lever is used to raise and lower the cutting bridge.
The blade is fed downwards when the lever is turned
anticlockwise. When the required cutting depth is
achieved the lever is turned to the neutral position.
The blade is raised by turning the lever clockwise.
This function works as soon as the machine is
connected to the power.
3. Water selector
Turn this knob anticlockwise to open the water valve.
Water is led through the blade spindle and out to the
blade flange, where the water cools the blade and
prevents dust build-up.
4. Start knob
Used to start the blade.
62 - English
13
11
10
3
12
5
11
7
4
5. Emergency stop
Cuts all power to the machine. No functions can be
activated until the emergency stop has been reset. The
emergency stop is reset by pulling out the button.
6. Power supply
For connecting an electrical connector of the type:
5-way 400 V/16A
4-way 480V/16 A.
4-way 600V/16A
7. Water connector
Water coolant is connected to the machine here.
8. 1-Phase 230V outlet Socket
To connect a 230V tool to the machine.
9. Personel protection
Will cut the power to the 1-phase outlet socket at 30
mA earth fault.
10.Propulsion/Parking brake
When the foot lever is in the illustrated position the
drive is engaged. When the foot lever is in this position
Operator's Manual FS 700EX
2
8
10
1
6
9