File System - Sony BVP-900 series Bedienungsanleitung

Display capability
The BVP-900/900P displays the zoom position, focus
position, the setting status of a camera and warning
messages on the viewfinder screen in characters
generated by a built-in character generator. A box
cursor, center marker, safety zone, and zoom position
are also displayed on the viewfinder screen.
High-resolution 7-inch viewfinder attachable
An optional 7-inch BVF-77/77CE black-and-white
viewfinder or 7-inch BVF-7700/7700P color
viewfinder can be used with the BVP-900/900P.
For easy-to-see operation, the viewfinder angle can
easily be changed and fixed in the desired position.
You can attach and detach the viewfinder without any
tools.
Picture-in-picture capability
You can simultaneously check the camera picture and
the return video picture.
High-picture-quality return video
Monitoring a high-quality return video picture on a
black-and-white viewfinder or color viewfinder is
possible thanks to a 3-line-adapted comb filter.
Reliable transmission using a triax cable
The BVP-900/900P supplies wideband component
video signals (Y, R–Y, and B–Y) to a CCU-700A/
700AP via a triax cable of high transmission
reliability. A triax cable simultaneously transmits
power, video, audio, and control signals between the
BVP-900/900P and CCU-700A/700AP. Higher
resolution and picture quality have been achieved
thanks to its wide bandwidth.
Compact, lightweight, and power-saving
design
The BVP-900/900P has a compact, lightweight, and
low-power consumption design, which are basic
requirement for outdoor broadcasting.

File System

The BVP-900/900P has the capability of storing the
adjustment data in one of the following files.
Reference file
The reference file stores the reference values used for
automatic setup adjustment and the standard settings of
the switches.
Scene files
Scene files store paint data for each scene. For
example, if you store data prepared in rehearsal for a
particular scene in a scene file, the data can be
retrieved to reproduce the same camera settings as
used in rehearsal.
Lens files
Lens files store specific data for a lens to be used.
When you use a recommended lens, the standard
values are stored in a lens file at the factory.
OHB files (stored in the CCD unit)
OHB files store specific data for a CCD unit to be
used. The standard values are stored in an OHB file at
the factory.
Creation, storage and retrieval of files are performed
using an optional MSU-700 Master Setup Unit or
RCP-700-series Remote Control Panel. The type and
number of files which can be handled depend on the
used unit.
For details, refer to the System Manual.
3 (E)