File System - Sony BVP-950 series Bedienungsanleitung

File System

The BVP-950/950P can store the adjustment data in
one of the following files.
Reference file
The reference file stores the reference values used for
automatic setup adjustment and the standard settings of
the switches.
Scene files
Scene files store paint data for each scene. For
example, if you store data prepared in rehearsal for a
particular scene in a scene file, the data can be
retrieved to reproduce the same camera settings used in
rehearsal.
Lens files
Lens files store specific data for a lens to be used.
When you use a recommended lens, the standard
values are stored in a lens file at the factory.
OHB files (stored in the CCD unit)
OHB files store specific data for a CCD unit to be
used. The standard values are stored in an OHB file at
the factory.
Creation, storage and retrieval of files are performed
using an optional MSU-700 Master Setup Unit or
RCP-700-series Remote Control Panel. The type and
number of files which can be handled depend on the
unit used.
For details, refer to the System Manual.
3 (E)