Troubleshooting - Dustcontrol DC 2800H Asbest Übersetzung Der Originalbetriebsanleitung

Troubleshooting

Problem
Motor not running.
Motor stops
immediately after
starting.
Motor runs, but no
suction.
Motor runs, but
poor suction.
Machine blows
dust.
Abnormal sound
from machine.
Cause
Power supply not
connected.
Incorrect fuse.
Suction hose not
connected. Hose
blocked.
Suction hose perforated.
Blocked filter.
Suction hose too long or
narrow.
Hose partially blocked.
Top of machine poorly
fitted.
Dust trapped in cyclone.
Filter loose or damaged.
DC 1800H/DC 2800H, Art.nr. 9497-G
Action
Connect power supply.
Replace with correct
fuse.
Connect hose. Reverse
or clean hose.
Replace hose.
Clean or replace.
Replace hose.
Reverse or clean hose.
Adjust fitting.
Remove top and clean
cyclone.
Check and replace as
necessary.
Book service.
33