Fitting The Side Panels - Electrolux FI5004NA+ Benutzerinformation

820 mm
870 mm

8.4 Fitting the side panels

1. Fit the brackets onto the panels in
the positions shown in the diagram.
A
15 mm
820 mm
15 mm
280 mm
C
B
17.5 mm
1015 mm
64 mm
539 mm
30 mm
260* mm
541 mm
a. Rear edge
b. Front edge
c. Right hand side panel
The dimension of 260* mm is allowed
for fitting a 100 mm plinth below the
panel. For different plinth sizes,
increase the dimension of 260* mm
accordingly.
2. Apply spacers (D) to the hinges
before installing the appliance into
the cabinet . See picture
D
2
3. Rest the panels against the
appliance.
4. Fit the rear brackets, taking into
account the thickness of the panels
(maximum width of unit 900 mm).
For a correct alignment make sure
that the distance between the
appliance and the cabinet is of 45
mm.
5. Secure the panels at the front (N).
ENGLISH 15
D
1
45 mm