Operation - Electrolux FI5004NA+ Benutzerinformation

6 www.electrolux.com

3. OPERATION

3.1 Freezer Control panel
1 2
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (+)
4. Temperature display
5. Temperature regulator (-)
6. Alarm light
7. Alarm reset switch
8. FastFreeze light
9. FastFreeze switch
3.2 Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF switch.
The Pilot Light will light up.
3.3 Switching off
To switch off the compartment press
ON / OFF. The Pilot light and the
Temperature display goes off.
3.4 Freezer Temperature
regulation
The temperature can be adjusted
between -15°C and -24°C.
1. Press the Temperature regulators (+)
or (-), temperature flashes on display.
2. To increase the temperature press
the Temperature regulator (+).
To decrease the temperature press
the Temperature regulator (-).
3.7 Fridge Control panel
1. Pilot light
3 4 5 6 7 8 9
The temperature display shows set
temperature for a few seconds.
3.5 High temperature alarm
In the event of abnormal temperature
rise inside the freezer (for example due
to an earlier power failure) Alarm light
starts to flash and buzzer sounds.
1. Press the Alarm reset switch to stop
the buzzer.
When the temperature returns to the
set one, the Alarm light continues to
flash for a few seconds.
3.6 FastFreeze function
You can activate the FastFreeze function
by pressing the FastFreeze switch.
TheFastFreeze light will light up.
1
2. ON/OFF switch
The compartment reaches
the selected temperature
within 24 hours.
This function stops
automatically after 52 hours.
It is possible to deactivate
the function at any time by
pressing FastFreeze switch.
The FastFreeze light will
switch off.
2 3 4 5 6 7 8 9