Fitting The Side Panels - Electrolux FI 5004 NA+ Benutzerinformation

820 mm
870 mm

7.4 Fitting the side panels

A
15 mm
820 mm
15 mm
280 mm
C
B
17.5 mm
1015 mm
64 mm
539 mm
30 mm
260* mm
541 mm
Before installing the appliance between
units, adjust the height of the feet and
rear wheels. The wheels are factory set
for a height of 820 mm. To align the ap-
pliance to a height of 870 mm, raise it by
adjusting the feet with a spanner, then
remove the wheels and refit them in the
lowest position.
Fit the brackets onto the panels in the
positions shown in the diagram. The di-
mension of 260* mm is allowed for fitting
a 100 mm plinth below the panel. For
different plinth sizes, increase the dimen-
sion of 260* mm accordingly.
1. Rear edge
2. Front edge
3. Right hand side panel
ENGLISH 15