Electrolux FI5004NA+ Benutzerinformation Seite 16

16 www.electrolux.com
6. Fix the squares (contained in the
bag) to the lower part of the door
(references already provided).
7. If necessary, door opening angle
max 90° can be obtained by
introducing the pivots (L) supplied
separately. See picture.
L
8.5 Fitting the door panels
1. Open a door a remove the bracket
cover. Undo the nuts with washers
and remove the bracket from the
door.
2. Drill the small doors as shown in the
figure.
L
o
90
o
115
2
1
10 mm
1013
N
N
3. Fix the bracket to the door with the
4. Refit the bracket on the adjustment
214 214
193 193 193
25
4
min. 3
4 4
60
25
6
min. 444 min. 444
max. 447 max. 447
• 4. Top right–and front panel
• 5. Top left-hand front panel
• 6. Bottom right-hand front panel
• 7. Bottom left-hand front panel
screws contained in the bag.
screws and screw the nuts with
washers without tightening them
down.
193
25
5
1013
60
25
7
mm