Stanley SGC-13000N-T Originalanleitung Seite 16

G
B
4. Allow the engine to cool. Remove the
spark plug and put 60 ml of SAE-30 of
high quality motor oil into the cylinder. Pull
the starter rope slowly to distribute the oil.
Replace the spark plug.
Remove the spark plug and drain all
of the oil from the cylinder before
attempting to start the unit after storage.
5. Use clean cloths to clean off the outside of
the compactor and to keep the air vents
free of obstructions.
Do not use strong detergents or petroleum
based cleaners when cleaning plastic
parts. Chemicals can damage plastics.
5. Pull up the spring bolt and fold up the
wheels bracket.
6. Carefully fold the handle down. Do not allow
control cables to become pinched or bent.
7. Store your plate compactor in upright
position in a clean, dry building that has
good ventilation.
LIFTING/TRANSPORTING
See technical data for the weight of the machine.
To avoid burns or fire hazards, let engine cool
before lifting / transporting machine or storing
indoors.
16