Cooking Zones Control - Kaiser HC 5 serie Gebrauchsanweisung

1 2
5
16

COOKING ZONES CONTROL

3 4
The cooking zones control is achieved by means
of knobs 1, 2, 3 and 4 set up on the control panel
of the cooker 5.
The graphic symbols above the knobs indicate
which cooking zone is controlled by the selected
knob.
To switch on or regulate a cooking zone:
6
x
turn the knob clockwise counter clockwise
6,
x set up the knob in the position 7.
The knobes enable fluent heat supply to the
cooking zones.
7
The double field heating elements are steered by
the energy control with the integrated switch of the
outer field.
By means of the knob 8 you can ensure the fluent
heat supply only to the inner cooking zone. To
switch off the outer field:
8
x turn knob clockwise against the stop 9 and
let it go.
By this moment you can control the fluent heat
supply to both inner and outer cooking zones.
To switch off the cooking zones set up the knob
9
in the position „0" 10.
To control the heat supply in case of the control
panel equipped with sunk knobs Push:
x
push the knob slightly and let it go.
The knob will come out of the control panel.
10
To countersink the knob:
x
push the knob as far as it will go and let it
go.
EN