Bosch MUZXL Serie Gebrauchsanleitung Seite 8

en
Warning!
The continuous-feed shredder must
be completely assembled before use.
Never assemble the continuous-feed
shredder on the base unit.
Operate the continuous-feed shredder
in the indicated operating position only.
If you are not working with the original bowl
of the MUM8.../MUMXL.., the tool drive cover
must be attached.
Important information
In these instructions for use the recom-
mended reference values for the operating
speed refer to appliances with a 7-setting
rotary switch.
For appliances with a 4-step rotary switch
the guide values can be found in the
following table:
7 settings: 1...2...3...4...5...6...7
4 settings: 1........2........3........4
For some models:
Professional Supercut reversible
disc/reversible slicing disc –
coarse/fine
for slicing fruit and vegetables.
Process at setting 5.
Designation on the reversible slicing disc:
"Grob" for the coarse cutting side
"Fein" for the fine cutting side
Warning!
The professional Supercut reversible
disc/reversible slicing disc is not suitable
for slicing hard cheese, bread, bread rolls
or chocolate. Slice boiled, waxy potatoes
only when they are cold.
Shredding reversible disc –
coarse/fine
for shredding vegetables, fruit and cheese,
except for hard cheese (e.g. Parmesan).
Process at setting 5 or 7.
Designation on the reversible shredding disc:
"2" for the coarse shredding side
"4" for the fine shredding side
Warning!
The reversible shredding disc is not suitable
for shredding nuts. Shred soft cheese with
the coarse side only (at setting 7).
8
Grating disc – medium-fine
for grating raw potatoes, hard cheese
(e.g. Parmesan), cooled chocolate and nuts.
Process at setting 7.
Warning!
The inserted blades must be face up.
The grating disc is not suitable for grating
soft cheese and cheese slices.
Working with the continuous-feed shredder
Fig. 
Press release button and move

multi-function arm to position 1.
Cover unused drives with drive

covers.
Insert the bowl:

– Tilt the bowl forwards and then
set it down.
– Turn anti-clockwise until it locks
into place.
Press release button and move

multi-function arm to position 3.
Remove drive cover from the drive

of the continuous-feed shredder
(Fig. -5a).
Hold disc holder at the lower end,

ensuring that the two tips are face up.
Carefully place the cutting disc onto

the tips of the disc holder (Fig. -6a).
In the case of reversible discs, ensure
that the required side is face up.
Grip disc holder at the upper end and

insert into the housing (Fig. -6b).
Attach the cover (note mark) and turn

all the way in a clockwise direction.
Place continuous-feed shredder on the

drive and rotate all the way in a clockwise
direction, as illustrated in Fig. -8.
Insert the mains plug.

Turn rotary switch to recommended setting.

Put food to be processed in the feed

tube and push down with the pusher.
Warning!
Prevent the cut ingredients from building
up in the outlet opening.
Tip: To ensure even cutting results, process
thin ingredients in bunches.
Note: If the food to be processed sticks
in the continuous-feed shredder, switch food
processor off, pull out mains plug, wait until
the drive comes to a standstill, remove cover
from the continuous-feed shredder and
empty feed tube.
Robert Bosch Hausgeräte GmbH