After successfully connecting with the outdoor
sensor, the weather station can display the tem-
perature trend (outdoor)
trend (indoor)
You may see the following displays:
The
weather station's LC display if the batteries in the
outdoor sensor or the weather station are weak.
22 GB/IE
91838_aur_Temperaturstation_content_LB3_GB-FI-SE-DK-BE.indd 22
Press the SET / RESET button
maximum and minimum values, are being dis-
played to reset the values.
Press the SELECT button, to return to the
default display.
Displaying temperature trends
.
5
= The temperature is rising.
= The temperature is constant.
= The temperature is falling.
Battery state display
and
3
Replacing the batteries
Open the battery compartment
Remove the exhausted batteries.
Insert two new 1.5 V
battery compartments.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in
the battery compartments (see Figs. C + E).
Close the battery compartments.
20
and the temperature
1
symbols appear in the
7
batteries (AA) into the
while the
or
.
24
30
30.08.13 08:35