User Mode - Helios KWL EC 800 S Pro Montage- Und Betriebsvorschrift

Installation and Operating Instructions
User lock
Protection level
None
Change PIN
Password
Multiple security levels can be selected:
On/Off
The unit can be activated or deactivated without a password.
On/Off, Temp., airflow
Enables the activation and deactivation of the unit, as well as setting of the
temperature and airflow without a password.
Temp., airflow
Enables the setting of the temperature and airflow without a password.
Full
Allows no settings without a password.

User mode

The unit can be activated and deactivated and the temperature and airflow
can be set without a password.
Once the password has been entered, the unit can be fully contro-
lled and adjusted.
Menu 49 – Other settings
21 -
21 - Network Network
23 - User lock
23 - User lock
25 - Factory reset 49 -
Other settings
50 - 01 - Mode
Factory reset
01 -
Mode
15 - Modbus RTU
Other settings
Activate/deactivate
summer time changeover
Central Ventilation Units KWL EC.. S Pro/WW
User securi-
ty level
Controller address
(when using 2 controllers on one unit)
Menu 50 – Back to factory settings
23 -
23 - User lock
21 - Network
49 -
49 - Other setting
23 - User lock
50 -
01 -
01 - Mode
02 -
15 - Modbus RTU
Factory reset
Reset to factory settings
By pressing FACTORY SET., the unit will be restored with facto-
ry settings.
The following parameters will not
change:
– AQS sensor settings
– Ventilation mode
– HW settings
– Temperature sensor
– Modbus settings
21
User lock
Other settings
Factory reset
Mode
Hw setting
TOVÁRNÍ RESET
FACTORY SET.
EN