Helios KWL EC 800 S Pro Montage- Und Betriebsvorschrift Seite 55

Installation and Operating Instructions
Menu 04 – Fan calibration
01 -
Mode
02 -
Hw setting
Fan calibration
05 -
Filter calibration
07 -
Heater battery
Fan calibration
The calibration takes a few minutes. Do not cancel this process. During
calibration, the unit determines the maximum pressure loss and the
maximum air flow when the fan runs at full speed.
NOTE! The unit will not function properly if the distribution
network is not complete during calibration, or if the flaps or
valves are not closed, etc.
flow
Max. flow rate
Menu 05 – Filter calibration
02 -
Hw setting
04 - Fan calibration
Filter calibration
07 -
Heater battery
08 -
AQS sensor
The filter calibration must be carried out for the initial calibration and after
a filter change.
Central Ventilation Units KWL EC.. S Pro/WW
Calibration
Kalibrierung starten
Max. pressure
Menu 07 – Heater battery
04 -
05 -
08 -
09 -
Vorerhitzer
Ohne
Ohne
Elektrisch
Wasser
Heater battery activation option.
Menu 08 – AQS sensor
05 -
07 -
09 -
10 -
Select AQS
Probe DCV
AQS Sensor
sensor
17
Fan calibration
Filter calibration
Heater battery
AQS sensor
Temperature sensor
Heater battery
Heizregister
Ohne
Filter calibration
Heater battery
AQS sensor
Temperature sensor
Supply air duct limit
Ohne
Set the limit value
for air quality
sensors
AQS Grenzw
EN