Symbols Used In This Manual; Symbols On The Power Tool; For Your Safety; Intended Use - Flex L 1710 FRA Handbuch

Contents
Symbols used in this manual . . . . . . . . . 14
Symbols on the power tool . . . . . . . . . . 14
For your safety . . . . . . . . . . . . . . . . . . . 14
Noise and vibration . . . . . . . . . . . . . . . . 18
Disposal information . . . . . . . . . . . . . . . 18
-Declaration of Conformity . . . . . . . . 18
Technical specifications . . . . . . . . . . . . 19
Overview . . . . . . . . . . . . . . . . . . . . . . . . 20
Instructions for use . . . . . . . . . . . . . . . . 20
Maintenance and care . . . . . . . . . . . . . . 22
Exemption from liability . . . . . . . . . . . . . 23

Symbols used in this manual

WARNING!
Denotes impending danger.
Non-observance of this warning may result
in death or extremely severe injuries.
CAUTION!
Denotes a possibly dangerous situation.
Non-observance of this warning may result
in slight injury or damage to property.
NOTE
Denotes application tips and important
information.

Symbols on the power tool

Before switching on the power
tool, read the operating manual!
Wear goggles!
Disposal information for the old
machine (see page 18)!
14

For your safety

WARNING!
Before using the angle grinder, please read
and follow:
these operating instructions,
-
the "General safety instructions" on the
-
handling of power tools in the enclosed
booklet (leaflet-no.: 315.915),
the currently valid site rules and the regu-
-
lations for the prevention of accidents.
This angle grinder is state of the art and has
been constructed in accordance with the
acknowledged safety regulations.
Nevertheless, when in use, the power tool may
be a danger to life and limb of the user or a third
party, or the power tool or other property
may be damaged. The angle grinder may
be operated only if it is
as intended,
-
in perfect working order.
-
Faults which impair safety must be repaired
immediately.

Intended use

This angle grinder
- for commercial use in industry and trade,
- is designed for dry grinding and cutting
metal and stone,
- for grinding surfaces, for derusting and
stripping paint when used with the elastic
sanding pad,
- for polishing unpainted metal surfaces
(L 1506 VR and LE 14-7 125 INOX only),
- for use with grinding tools and
accessories which are indicated
in these instructions or recommended
by the manufacturer.
Not permitted are e.g. chain cutting wheels,
saw blades.

Safety instructions

WARNING!
Read all safety instructions and other
instructions. Failure to observe the safety
instructions and other instructions may re-
sult in an electric shock, fire and/or serious
injuries. Keep all safety instructions and
other instructions in a safe place for the
future.
Angle grinder