Operating Your New Appliance; Before First Use; Installing The Water Filter - Sage the Bambino Plus SES500 Kurzanleitung

PAGE HEADER.....

OPERATING YOUR NEW APPLIANCE

BEFORE FIRST USE

Machine Preparation
Remove and discard all labels and packaging
materials attached to your machine. Ensure you
have removed all parts and accessories before
discarding the packaging.
Clean the drip tray, drip tray grid, portafilter, filter
baskets and milk jugs using warm water and a
gentle dish washing liquid. Rinse well and dry
thoroughly before use.

INSTALLING THE WATER FILTER

1. Remove the water filter and water filter
holder from the packaging.
2. Set the reminder for the next month of
replacement. We recommend to replace
the filter after 3 months.
3. Soak the filter in cold water for 5 minutes.
4. Wash the filter holder with cold water.
5. Insert the filter into the two parts of the
filter holder. Ensure they are connected.
6. Remove the water tank from the
machine. Align the base of the filter
holder with the adapter inside the water
tank. Push down to lock into place.
8
5m
7. Fill the water tank with cold potable water
and reattached the machine, ensuring it is
properly attached and sitting flush to the
back of the machine.
FIRST USE
1. Remove the water tank and fill with potable
water to the indicated MAX line. Replace
the water tank onto the machine.
+
+
2. Ensure that the drip tray is correctly
positioned on the machine.
3. Plug the power cord into the power outlet
and switch on.
4. Press the 1 CUP, 2 CUP or STEAM buttons
to turn the machine on.
5. Press the 1 CUP button and the machine
will commence its first use cycle.
6. Once complete, the machine will go
into ready mode and all lights will be
illuminated. The first use cycle is to rinse
the machine and prime the heating system.
TURNING OFF MACHINE
To turn the machine off, press the 1 CUP and
STEAM button simultaneously.
+
+
2s
2s
OFF
OFF