Maintenance; Cleaning The Scanner - Plustek MobileOffice S400 Benutzerhandbuch

Clean and Maintenance
Your scanner is designed to be maintenance-free. However, constant care and
maintenance can keep your scanner working smoothly.

Cleaning the Scanner

When you use this scanner for the very first time after installation, you are
suggested to clean the scanner before use.
If unusual dots or lines are found in your scanned image, it is very likely that dust
particles or other foreign objects have been brought inside the scanner. You may
clean the scanner to rectify the problem.
The following describes how to clean the scanner:
1. Insert the special cleaning paper into the page feed slot of the scanner.
Attention
2. From the Windows START menu, point to All Programs > Your Scanner
Model Name, and then click Clean Wizard.
3. Click Clean Now from the window that pops up, and click Clean from the
window that pops up.
4. The scanner pulls the cleaning paper through the scanner, which completes
this scanner cleaning.
Chapter III.
Do use the cleaning paper included in our
package box.
cleaning paper in a safe and clean place
when you finish using it.
Do not use anything other than our cleaning
paper to clean your scanner.
sheet will influence the scan quality or even
lead to scanner malfunction.
19
Remember to replace the
Using other