Plustek MobileOffice S400 Benutzerhandbuch Seite 21

functions. They are especially useful when you need to repeatedly scan with the same
settings and send images to the same destination.
The button on the scanner panel will be used in this guide to demonstrate the
scanner operations. You may also use DocAction's on-screen Execute menu to
perform the same scanning tasks.
Configure Button Settings
Before performing your first scan via scanner buttons, you are recommended to
configure the button settings to your needs and preferences first. There are two ways
to configure or view the button settings of DocAction:
Double-click the icon
Right-click the icon
Button Configuration in the pop-up menu that opens.
Within the "Button Configuration" window, you can find a row of icons running
through the left side of the window. Each icon corresponds to a single-touch button on
your scanner's front panel (as well as DocAction's on-screen Execute menu). Clicking
any icon on the left pane and its current button settings are displayed immediately on
the right pane. You may adjust the settings as desired.
Click the Help button within the Button Configuration window for more information
about the settings.
Scan from the Button
Scanning documents or images from this scanner is very easy. Follow the two
steps described below:
1. Place the document or image onto the scanner.
2. Do one of the following to start scanning:
Press the button from the scanner's panel.
Right-click the icon
Execute in the pop-up menu that opens. Click the Scan button function
item in the pop-up menu.
The scanner starts to scan immediately and carry out the corresponding action
according to the settings you have set up in the Button Configuration window.
Attention
in the Windows system tray.
in the Windows system tray, and then choose
in the Windows system tray, and then choose
The [Scan] button can function with the default
setting "Scan", even though you didn't define the
function by using DocAction beforehand.
18