Plustek MobileOffice S400 Benutzerhandbuch Seite 12

a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the "AutoPlay" window.
b. Click on the "Yes" button if the "User Account Control" dialog pops up. Follow
the instructions in the pop-up installation message.
c. In the "Device Manager" window, right-click on this scanner under "Other
devices" and select "Update Driver Software" from the pop-up menu.
Click "Browse my computer for driver software" in the window that appears,
and click the "Browse" button.
d. In the "Browse For Folder" window, select the folder or the CD-ROM drive that
contains this scanner driver and click the "OK" button to return to the previous
screen. Click the "Next" button. Afterwards, please skip to procedure 8.
When the Setup/Application CD is for one scanner model
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive. Click Run install.exe in the "AutoPlay" window.
b. Click on the "Yes" button if the "User Account Control" dialog pops up. If the
pop-up wizard window appears click "Next", and click "Install this driver
software anyway" in the "Windows Security" window then click "Finish" in the
wizard window. Afterwards, please skip to procedure 8.
6. During the process of the installation, a message "Windows can't verify the
publisher of this driver software" might be prompted. Please ignore it, and click on
[Install this driver software anyway] to continue the installation without any
misgiving at your scanner functioning.
7. When the system completes the installation, click on the "Finish" button.
8. Follow the on-screen instructions to install all software that your new USB scanner
requires.
9. After the software is installed, you will be prompted to perform the scanner
calibration.
10. Insert the special calibration sheet, included with the scanner, face down into the
page feed of the scanner.
11. Follow the on-screen instructions to complete the scanner calibration.
9