Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
12. After the installation is complete, close all open applications and click on the
"Finish" button to restart your computer.
Information
Attention
S
t
e
p
3
.
T
e
s
t
i
n
g
S
t
e
p
3
.
T
e
s
t
i
n
The following test procedure checks to see if the scanner is properly functioning
with your computer and the scanning software. Before testing your scanner, double
check to make sure that all connections are securely fastened.
To properly test your scanner, please perform the following steps:
1. Do one of the following to open the Button Configuration window:
Double-click the DocAction icon
Right-click the DocAction icon
choose Button Configuration... in the pop-up menu that opens.
2. Clicking the Scan icon on the left pane in the Button Configuration window
displays its current button settings on the right pane. In the Button
Configuration window, choose from the dropdown list of Button Template to
select "File Utility", and keep in mind the default saving folder show in the
"Saving folder" dropdown list.
3. Insert the document face down into the scanner. Align the document to the
arrow sign
If the scanner installation is not started and
displayed automatically on the screen, click
"START", select "Run" and type in "D:\Install"
(where D: is the drive letter assigned to the
CD-ROM drive of your computer.)
Alternatively you may also use any plain
white sheet of paper sized in Letter size (8.5"
x 11.69") instead; however, the calibration
effect may be less good than the special
calibration sheet.
Save the Setup/Application CD in case you
need to reinstall the driver and software in the
future.
Save the Calibration Sheet in case you need
to calibrate the scanner in the future.
t
h
e
S
c
a
n
n
e
r
g
t
h
e
S
c
a
n
n
e
r
on the right of the scanner.
in the Windows system tray.
in the Windows system tray, and then
10
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
