Plustek MobileOffice S400 Benutzerhandbuch Seite 11

when Windows starts.
2. For Windows 2000:
a. Click on the "Next" button when the "Add New Hardware Wizard" window is
displayed.
b. Select "Search For The Best Driver For Your Device [Recommended]" and
click on the "Next" button.
c. The next window will ask you where to search to find the drive. Select "CD-
ROM drive", and deselect "Floppy disk drives" if it is checked.
d. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive and then click on the "Next" button.
e. Click on the "Next" button in the window that appears.
f. During the process of the installation, a message "Digital Signature required"
might be prompted.
installation without any misgiving at your scanner functioning. Afterwards,
please skip to procedure 7.
3. For Windows XP:
a. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive.
b. Select "Install The Software Automatically [Recommended]" and click on the
"Next" button.
c. Click on the "Next" button in the window that appears. Afterwards, please skip
to procedure 6.
4. For Windows Vista:
a. Select "Locate and install driver software (recommended)" when the "Found
New Hardware" window is displayed.
b. Click on the "Continue" button when the "User Account Control" dialog pops up.
c. Insert the Setup/Application CD-ROM, included with your scanner, into your
CD-ROM drive when the system prompts you "Insert the disc that came with
your USB Scanner", and click on the "Next" button. Afterwards, please skip to
procedure 7.
5. For Windows 7:
When the Setup/Application CD is for several scanner models
Please ignore it, and click on "Yes" to continue the
8