Technical Details - Vaude Hogan UL argon 2P Bedienungsanleitung

TECHniCal DETailS:

Depending on tent models, VAUDE tents feature the following:
fEaTUrES:
Silicone Seam Seal:
VAUDE is the only manufacturer to successfully factory seam seal siliconised
tents for full waterproof protection!
Siliconized:
• Increases tent life by 20% - a triple coating reflects damaging UV radiation
to a much greater degree than standard treatments.
• 8-times greater tear resistance – siliconized fabrics attain a tear resistance
of 8-11 kg compared to 1.3 kg of PU coated fabrics.
• Excellent water beading properties – water simply beads on the surface.
• Retensioning – the nylon carrier material swells up when damp or wet.
The tent needs to be retensed if rain/snow initiate.
• Sealing – siliconized materials cannot be factory seam sealed (exception:
VAUDE Silicon Seam Seal). When camping in extremely rainy conditions
we recommend sealing all seams by hand with a silicon seam sealer.
flY:
Tear-resistant 40D polyamide ripstop 240T Si/Si;
waterproof to 3,000 mm.
• High resistance to tearing due to tensile polyamide fabric embedded with
reinforcing fibres.
• Triple silicon coating to the outer and inner surfaces for maximum tear-
resistance and water run off, as well as increased UV-resistance.
innEr TEnT:
30D polyester ripstop 285T.
285T – tightly woven ripstop polyester. Wind, sand and snow proof with
high tear resistance and breathability.
floor:
40D polyamide ripstop 240T, pU laminated, water column 10,000 mm.
GAL_TENT_Hogan_UL_Argon_2P.indd 13
Hogan Ul argon 2p 13
08.08.2011 11:50:30