Technical Details - Vaude LIZARD GUL 1P Bedienungsanleitung

ENGLISH
be correctly repaired as soon as possible in order
to prevent further tearing. Please contact your
retailer to do this.
• Tent pole shock cords can be retightened if neces-
sary (elasticity can wear out in very cold conditions
or due to aging). To do this fi rst remove the end cap
and then untie the knot in the cord. Retie the knot
further up the cord and replace the cap (W).

TECHNICAL DETAILS:

Depending on tent models, VAUDE tents feature
the following:
FEATURES/FABRICS:
SILICON SEAM SEAL:
VAUDE is the only manufacturer to successfully
factory seam seal siliconised tents for full waterproof
protection!
Siliconised:
• Increases tent life by 20% - a triple coating refl ects
damaging UV radiation to a much greater degree
13
than standard treatments.
• 8-times greater tear resistance – siliconised fabrics
attain a tear resistance of 8-11 kg compared to 1.3
kg of PU coated fabrics.
• Excellent water beading properties – water simply
beads on the surface.
• Retensioning – the Polyamid carrier material
swells up when damp or wet. The tent needs to be
retensed if rain/snow initiate.
• Sealing – siliconised materials cannot be factory
seam sealed (exception: VAUDE Silicon Seam Seal).
When camping in extremely rainy conditions we
recommend sealing all seams by hand with a sili-
con seam sealer.
FLY:
SUPER LIGHTWEIGHT 10D POLYAMIDE 6.6 RIPSTOP
280T SI/SI; 3,000 MM WATER COLUMN.
• Good tear resistance thanks to extremely fi ne,
super lightweight yet high-tenacity polyamide 6.6
thread with reinforced cross threads.
• SI - Triple layer silicon coating on both inner and ou-