Wear Parts - Oase ProMax Pressure Automatic 5500/5 Gebrauchsanleitung

WEAR PARTS

The following components are wear parts
and may only be replaced by the OASE
Service.
• Impeller unit
STORAGE/OVERWINTERING
The unit is not frost proof. If the unit is in-
stalled in a frost-protected place, it does
not need to be removed in case of minus
temperatures. If the unit is not installed in
a frost-protected place, it must be re-
moved and stored if minus temperatures
are expected.
How to correctly store the unit:
• Drain the unit as far as possible, clean
thoroughly and check for damage.
• Empty all hoses, pipes and connections
as far as possible.
• Thoroughly clean the unit, check it for
damage and replace any damaged
parts.
• Store the unit in a dry and frost-free
place.
• Protect open plug connections from
moisture and dirt.
20 ProMax Pressure Automatic 5500/5, 6000/8, Well Automatic 6000/8
DISPOSAL
N O T E
Do not dispose of this unit with domestic
waste.
• Render the unit unusable beforehand
by cutting the cables and dispose of the
unit via the return system provided for
this purpose.