Wall Mounting; Hearing Aid Compatible; T−Net Set−Up - AUDIOLINE TEL 48 Extra Plus Bedienungsanleitung

2.4

WALL MOUNTING

Your AUDIOLINE Telephone 48 Extra Plus is also suitable for wall
mounting. Use two screws for fixing it to the wall. Drill two holes with a
vertical distance of 83 mm between them and leave the screws protruding 5
mm from the wall. Now place the telephone over the screws and push down
slightly.
Note: There must be no lines or pipes under the area where the holes are
to be drilled.
When the telephone is used on a table, the receiver hanging hook must be
in the flush position as shown in diagram A (factory setting). When
mounting on the wall, the telephone receiver hanging hook is pulled out and
rotated. See diagram B.
2.5

HEARING AID COMPATIBLE

The telephone is compatible with all the most common hearing aids on the
market. However, due to the numerous models available, there is no
guarantee that the telephone will operate perfectly with all hearing aids.
2.6 T−NET SET−UP
Your AUDIOLINE Telephone 48 Extra Plus supports the most important
DEUTSCHE TELEKOM added value functions (e.g. brokering, call waiting,
three−way conference, etc.). For these, you will need the "FLASH" setting
on your telephone. More information can be found in item 4. Please contact
DEUTSCHE TELEKOM to gain access to these functions (some of which
are subject to charge).
− INSTALLATION −
21