D&H DH05C Anleitung Seite 75

List of supported parameters:
par Name and definition
001 Loco address unit position
002 Loco address hundred position
003 Loco address for SX1
If > 111 = deactivated
004 Additional channel 1 for SX1
Functions F1 – F8
005 Additional channel 2 for SX1
Functions F9 – F16
006 Loco address output
1 = activated
007 Effectiveness additional channels
0 = relative:
Additional channel 1 = par003 + par004
Additional channel 2 = par003 + par005
1 = absolute
008 Consist address unit position
Reserved
009 Consist address hundred position
Reserved
011 Acceleration time
The value corresponds to the time in seconds from start to maximum speed
31
Range
0 – 99 (1)
0 – 99 (10)
0 – 255 (112)
0 – 255 (1)
0 – 255 (0)
0, 1 (1)
0, 1 (0)
0 – 255 (3)