Functions - D&H DH05C Anleitung

5

Functions

 Operation can be controlled either by conventional DC command stations or by digital central units
supporting the formats SelecTRIX 1 and 2, NMRA-Norm (DCC) or MM1/MM2-Standard
 Automatic switchover between conventional DC and digital operation
 In case of digital operation the last programmed system will be activated (no automatically switchover!)
SelecTRIX 1

SelecTRIX 2

DCC

 Load compensation state of art, that way an especially smooth regulation behavior
 Various regulation variants for an optimal adaptation to the motor
127 internal speed steps

Adjustable motor frequency (low frequency, 16 kHz, 32 kHz)

 Block system operation by simple diodes (digital operating system)
Light and functional outputs can be dimmed and activated analogically

 Shunting gear
Electronic interchange ability of motor, lighting and track connections

 All function outputs freely programmable
 Thermal protection, insulation
Reset function for DCC and SX2

Decoder can be updated:

The update can be executed on the incorporated decoder when the loco is standing on track (no need
to open the engine, the SW-Download can be downloaded from the Internet cost free)
31 speed steps, 100 addresses
127 speed steps, 10.000 addresses, 16 additional functions
Short addresses (1-127), long addresses (0001-9999),
with 14, 28, 126 speed steps
8