Operating System Dcc; Functions - D&H DH05C Anleitung

8

Operating System DCC

8.1

Functions

Short addresses
Long addresses
Speed steps
Speed steps (internal)
Front light / rear light (can be dimmed)
Additional functions (can be dimmed)
Whole functions
Operation with brake diodes
Operation with brake generators
Consist mode
Programming on the main (POM)
Loco number output
Notice to address range:
DCC operation allows only address values from 1 to 127 for DCC-CV01, operating MM values from 1 to
255 are allowed. Values from 128 on lead to restricting the decoder operation only to MM, i.e. DCC
operation is no longer possible. DCC "service mode" is of course still possible.
Activating the long DCC-address by CV29/Bit5 makes that the decoder now just can only be operated
by DCC. Then MM operation is no longer possible and MM-programming is also disabled. Attention,
because "lock out" is possible.
1 – 127
0001 – 9999
14, 28,126
127
yes
2
28
yes
yes
yes
yes
yes
17