D&H DH05C Anleitung Seite 59

Reading out the extended characteristic values is executed by the entry of the character sequence
and a subsequently push on the programming key.
Writing of the extended characteristic values is executed by the entry of the character sequence
and a subsequently push on the programming key.
Notice:
Coreless motors should be operated with regulation variant 4 and pulse width 1. Damages due to
incorrect adjustments are excluded from the warranty.
Caution!
Reading out and entering extended characteristic values overwrites the default-values of the decoder.
In case you have varied the extended characteristic values, the default characteristic values of the
decoder must be entered anew.
Advice for decoder DH05C, DH10C, DH18A and DH21A:
For SX1-programming a connected SUSI sound module has to be removed. It is sufficient to interrupt
the supply voltage (red wire) during the time of SX1-programming.
SX2- resp. DCC-programming and D&H-sound modules are not concerned. Decoders DH12A and
DH16A support SX1-programming also with connected SUSI sound module.
00–111
00=VAI
15