Operating System Märklin-Motorola (Mm); Functions - D&H DH05C Anleitung

9 Operating System Märklin-Motorola (MM)
9.1

Functions

Addresses
Speed steps
Speed steps (internal)
Front light / rear light (can be dimmed)
Additional functions (can be dimmed)
Functions total (only MM2)
Operation with MM-brake section
Notice to address range:
In MM-operation address values from 1 to 255 are allowed. In DCC-operation are for DCC-CV01 only
values from 1 to 127 allowed. Values from 128 lead to operating the decoder only by MM, i.e. DCC-
operation is no longer possible. DCC-"service mode" is still possible.
On the other hand activating the long DCC-address by CV29/Bit5 leads that operating the decoder can
only done by DCC. Then MM operation is no longer possible and MM-programming is also disabled.
Attention, because "lock out" is possible.
1 – 255
14, 28
127
yes
2
12
yes
26