For the 7 variants above connect the decoder wires accordingly to following diagram:
red wire
with the right track wire (G1)
black wire
with the left track wire (G2)
orange wire
with the motor wire, which was connected to the right track (M1)
gray wire
with the motor wire, which was connected to the left track (M2)
white wire
with the front light (LV)
yellow wire
with the rear light (LR)
green wire
function output AUX1 (only DH16A-2/3 and DH21A-2/3)
violet wire
function output AUX2 (only DH16A-3 and DH21A-3)
blue wire
supply voltage up to 30 volts (+VS) (only DH16A-2/3 and DH21A-2/3)
In addition for SUSI interface (only if available):
red wire
SUSI supply voltage (ZVS)
blue wire
SUSI clock (ZCLK)
gray wire
SUSI data (ZDAT)
black wire
SUSI ground (GND)
11