Declaration Of Installation Conformity Pursuant To Annex Ii 1 B - Elektror S-HE Montageanleitung Und Bedienungsanleitung

Operating and assembly instructions S-HE

8 DECLARATION OF INSTALLATION CONFORMITY PURSUANT TO ANNEX II 1 B

As manufacturer,
EN
Elektror airsystems gmbh
Hellmuth-Hirth-Strasse 2
D-73760 Ostfi ldern
herewith declares that the product, to which this declaration relates, complies with the following essential requirements of the Ma-
chinery Directive (2006/42/EC).
Description of the partially completed machine:
High-Effi ciency-Blower S-HE 280/71; S-HE 315/63; S-HE 315/90; S-HE 355/112; S-HE 355/125; S-HE 400/56; S-HE 400/80;
S-HE 400/85; S-HE 400/112; S-HE 450/90; S-HE 450/95; S-HE 450/125; S-HE 450/160; S-HE 500/71; S-HE 500/100; S-HE 560/160
Serial number and year of manufacture can be found on the rating plate and on the accompanying delivery slip.
Description of the essential requirements of Machinery Directive (2006/42/EC), with which the partially completed
machine complies:
Machinery Directive (2006/42/EC): Annex I, Articles 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.5.1, 1.6.1, 1.7.1, 1.7.3
Electromagnetic Compatibility Directive (2004/108/EC)
Eco-design Directive for Energy-related Products (2009/125/EC)
The partially completed machine described here continues to fulfi l the protective regulations of the Low Voltage Directive
(2006/95/EC) according to Annex I, No. 1.5.1 of the Machinery Directive.
The commissioning of the partially completed machine is not permitted until it has been verifi ed that the machine, in which the
partially completed machine is to be installed, complies with the provisions of the Machinery Directive (2006/42/EC).
The following harmonised standards have been applied:
DIN EN 12100
DIN EN 60034-1
DIN EN 60034-5
DIN EN 60204-1
DIN EN 60664-1
As the manufacturer, Elektror airsystems undertakes to forward the special technical documentation in respect of the partially com-
pleted machine to national authorities at their request. The special technical documentation in respect of this partially completed
machine according to Appendix VII Part B has been created.
The person responsible for the documentation is Mr Steffen Gagg, Tel. +49 (0) 711/31973-124.
16
Kreher (Managing Director)
Ostfi ldern, 01.07.2014
Safety of machinery, general principles for design,
2011
risk assessment and risk minimisation
Rotating electrical machines, Part 1: Rating and performance
2013
Rotating electrical machines, Part 5: Degrees of protection provided
2007
by the integral design of rotating electrical machines (IP code) – Classifi cation
Safety of machinery – Electrical equipment of machines,
2007
Part 1: General requirements
Insulation coordination for equipment within low-voltage systems,
2008
Part 1: Principles, requirements and tests
www.elektror.com