Notes On Environment; Warranty; Declaration Of Conformity - Gesipa FireFox 2 Betriebsanleitung

Nut is not removed by turning
Cause
- Thread of nut deformed
- Removal period too short
- Nut not automatically
- Setting stroke or setting force not reached
- Nut stuck on threaded mandrel
Set nut is loose
Cause
- Setting stroke "Y" too short
- Setting force too small
- Air pressure too small
8.

Notes on environment

Dispose of hydraulic waste oil according to current environmental regulations.
Observe regulations about dangerous substances!
9.

Warranty

Our Blind rivet nut gun is covered by a
24-months guarantee from the date of delivery.
(Proof by invoice or delivery note)
Damages resulting from natural wear and tear,
overloading or inexpert handling will be ex-
cluded from the guarantee. Damages resulting
10. Declaration of Conformity EC
We hereby declare under our sole responsibility that the products conform to the following stan-
dards and guidelines: a. 2006/42/EG
Dr. Richard Gärtner
20
41303013_Gesipa_FireFox2_160413.indd 20
Remedy
- Setting stroke or setting force too great
> Reduce
- Press activation button longer
- Keep holding down activation button until re-
moved nut has been removed by turning
- Refill hydraulic oil
- Remove by pressing the removal button 7 or
unscrew with the help of a hexagon screw
driver (See item 5.3)
Remedy
- Increase setting stroke (See item 4.1)
- Increase setting force (See item 4.2)
- Increase air pressure to 5-7 bar
from material or manufacturing faults will be
removed free of charge by replacement or of-
fering repair. Claims can only be accepted if
the Blind rivet nut gun is returned in original
tamper free condition to the supplier or
GESIPA ® .
Hans-Ulrich Harder
16.04.2013 13:39:32