Invacare Aquatec KOGIA Gebrauchsanweisung Seite 17

4. Hold the backrest at the head end with one hand and slowly fold
the backrest all the way forward.
IMPORTANT!
Risk of damage
– When folding the backrest down, ensure that
the spiral cable of the hand control does not get
caught.
– Before folding the backrest down, ensure that the
backrest is completely in the lowered position.
– Do not fold the backrest down if there is water
in the bathtub.
5. Pull the backrest up off the seat and out of the bathtub.
1584939-A
6. Fold the side flaps of the seat inwards.
IMPORTANT!
– Release both rear suction cups simultaneously.
Release the rear suction cups A by pulling up on the protruding
7.
tabs B.
8. Lift the rear of the seat slightly. This releases the front suction
cups.
IMPORTANT!
– If the height adapters have been installed
(optional), you also have to pull the tabs of the
front suction cups to release them.
9. Take the base frame with seat plate out of the bathtub.
Make sure that all suction cups are detached before
taking the seat out of the bathtub.
10. Carefully stow all components of the bath lift.
Transport
17