Demo Performance; Selecting And Playing A Program; Selecting A Program - Korg RK-100S Bedienungsanleitung

Turning the power off
1. Lower the volume of your powered monitor speakers
or other external output device, and then turn off
their power.
2. Turn the VOLUME knob of the RK-100S all the way
toward the left, and then press and hold down the
power switch until the display indicates that you can
safely turn off the power.
If the AC adapter is being used, do not unplug it while
the RK-100S is powering off. The RK-100S is saving
settings for the favorites buttons and for the various
other parameters while it is powering off.
Auto power off function
If there is no user input for approx. 4 hours the auto power
off function will automatically turn off the RK 100S.
Note: With the factory settings, the auto power off func-
tion is enabled.
This function can be disabled so that the RK-100S will not
be automatically turned off.
See page 16 "Auto power off function"

Demo performance

The RK-100S contains demo songs that show off its sounds.
See page 75 "Voice Name List"
1
1,3
2
1. Hold down the SHIFT button and press the TAP
button.
The demo performance will begin.
2. Use the OCTAVE +/- buttons or the Sound lever to
select the demo song.
3. Press the SHIFT button to end the demo performance.
Demo performance
Selecting and
playing a program

Selecting a program

The RK-100S contains 200 programs that can be used with
various genres.
Using the SOUND lever
Use the SOUND lever on the front panel to select a program.
4
1
1. Move the SOUND lever to the + or - direction.
The program is switched. The
number of the selected program
appears in the display.
Each time the lever is moved, the
program is switched incrementally.
See page 75 "Voice Name List"
2. Adjust the VOLUME knob to the appropriate level.
3. Play the keyboard to check the sound.
4. Press the OCTAVE button to change the pitch range
assigned to the keyboard.
See page 10 "Switching the octave with the OCTAVE
buttons"
Favorites function
The RK-100S is equipped with the favorites function,
which allows you to assign your favorite programs to the
eight favorites buttons. A total of 40 programs (5 banks × 8
buttons) can be stored.
Using the favorites buttons
Programs have already been assigned to these favorites
buttons. Those programs can be immediately recalled by
pressing the corresponding button.
1
1
1. While holding down the SHIFT button, move the lever
2
3
2
9