Specifications - Makita 6841R Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Reversing switch lever
3-1. Hook
3-2. Clamping screw
4-1. Casing
4-2. Thumb screw
5-1. Plane bearing
5-2. Dust cover
5-3. Bit

SPECIFICATIONS

No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
Explanation of general view
6-1. Lever
6-2. Stopper base
6-3. Plate
6-4. Casing
8-1. Lock lever
8-2. Magazine cap
9-1. Screw strip
9-2. Magazine
10-1. Slotted passage
11-1. Lock lever
Model
Screw strip
-1
)
Overall length
Net weight
Safety class
) : 83 dB(A)
pA
) : 94 dB(A)
WA
2
) : 2.5 m/s or less
h
2
ENE033-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
ENF002-2
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
ENG905-1
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
ENG900-1
machine(s):
Designation of Machine:
Auto Feed Screwdriver
Model No./ Type: 6841R
are of series production and
Conforms to the following European Directives:
2006/42/EC
ENG901-1
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
4
11-2. Magazine cap
12-1. Portion A
13-1. Screw-driving position
15-1. Reverse lever
16-1. Protrusion (A)
17-1. Extension handle
19-1. Limit mark
20-1. Brush holder cap
20-2. Screwdriver
6841R
4 mm x 25 mm - 41 mm
6,000
333 mm
2.0 kg
/II
Corporation as the
ENH101-15
responsible