Troubleshooting - Klarstein 10030663 Anschluss- Und Anwendungshinweise

If the beer cooler does not work properly, please call the service centre;
To save time and money, before you call for service, check the Troubleshooting Guide. It lists cause of minor
operation problems that you can correct yourself.
Trouble
The tap does not work / can't
pour beer out
Too much bubble pouring out
Beer flows out too slowly

Troubleshooting

Cause
1. The pouring tube is in poor
connection or CO2 supplying is
cut off
2. No keg or no beer in the keg;
3. No gas in the CO cartridge
2
4. The CO pressure regulator knob
2
is close
1. Use a wrong way to pour beer out
2. The beer temp is high (better at
3-5 °C)
3. The keg is shaken before usage
4. Almost no beer in the keg
5. Too much pressure in the keg
1. Inside CO2 pressure isn't high
enough
2. The connection tube or pouring
tube has leakage
Solution
1. Well connect the pouring tube
and CO supplying
2
2. Change a new keg
3. Change a new CO cartridge
2
4. Turn the CO pressure regulator
2
knob on "+" position
1. Use the right way to pour beer
out
2. Cool the beer down to 3-5 °C
3. Put the beer keg aside a while
till no bubble inside
4. Change a new keg
5. Adjust the pressure knob to
"-" direction to decrease the
pressure or close the knob
1. Adjust the pressure knob to
release much CO pressure or
2
replace a new one.
2. Check whether the tube is
leakage or not, if so replace the
tube
38