Yard Force SC600ECO Originalanleitung Seite 14

INSTALLATION GUIDE
Firstly, locate the best position for your charging station, consider the nearest outdoor
electricity socket as this needs to be plugged in to mains at all times. Please note the
Cable length supplied is 9m.
The charging station item 5 must be placed on a flat surface, at ground level and it can
be connected with boundary wire both from front and rear side, meanwhile we need 2m
wire straight from front side to make sure the lawnmower can return to charging station
smoothly. And also there must be 1m flat space beside the charging station. This will allow
the Mower to enter the charging station correctly. If possible, locate your charging station
in the shade as the battery prefers to be recharged in a cool place.
Note: The charging station area should be flat enough, the pond or footstep is not allowed
to exist beside the charging station.
Pay attention to protect cable!
> 1 m
> 2 m
24
INSTALLATION GUIDE
The following positions are not allowed.
5>
Charging base left and right slope should be no more than 5 degree angle.
We recommend to keep 2 meters straight wire ahead leading into the charging station. If
your lawn soil is soft and uneven, we suggest to use 0.5*1 m plastic net in front of charging
base to avoid the rear wheel digging into the soil ahead of.
Once the position of the Charging station is confirmed and mains electrical connection is
also can be reached, please do not connect to main power yet. First you need to finish all
boundary layout work, and then after that, you can connect to the main power.
<5
25