Programs And Programming - Klarstein 10031206 Bedienungsanleitung

Preset Setting
Pressing PRESET SETTING each time, the pertinent preset time shows on the display and its indicator light
blinks. At the beginning, each pressing adds by 0.5 hour. When the preset time goes more than 10 hours, each
pressing adds by 1 hour. The maximum of the preset time should be 24 hours.
Finishing PRESET SETTING, for example, you set preset time is 4 hours, Then options selecting or pressure-
keeping setting, wait 8 blinks,it will turn to count backwards and start to work automatic after 4 hours later. (If
the preset time is less than 10 hours, it decreases by 0.5 hour. While,the preset time more than 10 hours, it
decreases by 1 hour.)
Pressure Keeping Setting
• Pressing PRESSURE KEEPING SETTING each time, the pertinent pressure-keeping time increases by 2 mins.
The maximum of the pressure-keeping time is 98 mins.
• Keep pressing PRESSURE KEEPING SETTING,the pressure-keeping time increases continuously.
• When setting the time, you can not select options.
• Finishing pressure time setting, wait 8 blinks,it turns to work automatic.the indicator light of the pressure
time stops blinking, After the pressure inside reaches the design one, the pressure-keeping time decreases
by 1 min.
• Press WARM/CANCEL ,it will cancel function selecting.
• When it is working, press WARM/ CANCEL to stop working.
• Any function can automatically transfer to warm keeping after its working. And the maximum of the warm-
keeping time is 24 hours.
• Unplug in. Hold the handle of the lid, turning in clockwise direction to the limited side, and open it. (Illustra-
tion 2&3) The food is serving.
To program the device step by step
1. Plug in, press Rice or other options key (or set the pressure-keeping time). 8 blinks later it tums to work au-
tomatic, and the time which displayed on the Screen stays on.
2. There is a sound when the pressure inside reaches the design one. Then, the pressure-keeping time starts
to decrease by 1 min.
3. It transfers to warm keeping automatically after the pressure keeping finishes. At the same time, there are
5 sounds, and the indicator light of WARM blinks, The temperature and pressure inside are still very high at
that time, meanwhile, The lid can't be opened because of itself' s safety protect device
4. Wait for the pressure inside releasing and the float falling down by itself, then only open the lid.
5. Unplug and serve the food.
17

Programs and Programming