Conformity To International Standards - Chauvin Arnoux MN93 Bedienungsanleitung

AmpFlex A193 800 mm
®
„ Dimensions (L x W x H)
„ Cord
„ Weight
AmpFlex A196A 610 mm
®
„ Dimensions (L x W x H)
„ Cord
„ Weight
Protection index
„ IP 40 for the clamps and IP 30 jaws open, according to IEC 60529
„ IP 50 for the MiniFlex
to IEC 60529 in operation
„ IP 67 for the MiniFlex
when the ring is screwed on
„ IK 04 according to IEC 50102
Drop test: according to IEC 61010-1

3.3. CONFORMITY TO INTERNATIONAL STANDARDS

Electrical safety according to IEC 61010-2-032.
Maximum appliable voltage:
„ MN93 and MN93A: 600 V Cat III or 300 V Cat IV
„ C193: 1000 V Cat III or 600 V Cat IV
„ PAC93: 600 V Cat III or 300 V Cat IV
„ MiniFlex : 1000 V Cat III ou 600 V Cat IV
®
„ AmpFlex : 1000 V Cat III or 600 V Cat IV
®
Type of current sensor as per IEC 61010-2-032:
„ MN93 et MN93A : type A
„ C193 : type A
„ PAC93 : type A
„ MiniFlex : type B
®
„ AmpFlex : type B
®
approx. 280 x 265 x 25 mm
3 metres long
approx. 270 g
approx. 215 x 200 x 25 mm
3 metres long
approx. 250 g
MA193 and MA194, and for the AmpFlex
®
MA196 and the AmpFlex
®
A196A according to IEC 60529
®
38
A193 according
®