Abicor Binzel ABIPLAS WELD 100 W Betriebsanleitung Seite 33

®
ABIPLAS WELD
6.2 Attaching the cable assembly to the device
1
Coolant return
Fig. 5 Connecting the torch
BAL.0092 • 2017-06-06
Attachment to the device occurs as standard using an ABICOR BINZEL
central connector.
NOTICE
• The pilot current cable and control lead must be equipped with the
appropriate connections for the particular power source type.
2
Coolant supply
1 Join the welding cable plug and socket at the power source and lock them.
2 Connect the pilot current cable to the power source.
3 For manual torches: connect the control lead to the power source.
6 Putting into operation
3
Control lead
1
2
3
4
4
Pilot current cable
EN - 13