Abicor Binzel ABIPLAS WELD 100 W Betriebsanleitung Seite 22

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 CE marking
2 Safety
2.1 Designated use
2.2 Personal protective equipment
(PPE)
2.3 Classification of the warnings
2.4 Special warnings for operation
2.5 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Signs and symbols used
3.4 Nameplate
4 Scope of delivery
5 Functional description
EN - 2
EN-3 6 Putting into operation
EN-3 6.1 Setting up the ABIPLAS
torch body
EN-3 6.2 Attaching the cable assembly to
EN-3 the device
6.3 Connecting the coolant
EN-3 6.4 Setting the shielding gas volume EN-15
EN-4
EN-4 7 Operation
EN-5 7.1 Before switching on
7.2 Welding process
EN-5
EN-5 8 Putting out of operation
EN-8
EN-8 9 Maintenance and cleaning EN-18
EN-8 9.1 Cable assembly
9.2 Torch body
EN-9
10 Troubleshooting
EN-9
11 Disposal
®
ABIPLAS WELD
EN-10
®
WELD
EN-11
EN-13
EN-14
EN-16
EN-17
EN-17
EN-17
EN-19
EN-19
EN-20
EN-21
BAL.0092 • 2017-06-06