Specifications - Makita BLM430 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Lock key
2-1. Battery converter (BCV01)
2-2. Installation hole
2-3. Hook
3-1. Battery cover
3-2. Product mounting adapter of the
BCV01
4-1. Cord
4-2. Slit
4-3. Upper holders
5-1. Battery converter (BCV03)

SPECIFICATIONS

Dimensions (L x W x H)
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Take particular care and attention.
･
Read instruction manual.
･
Danger; be aware of thrown objects.
･
The distance between the tool and
bystanders must be at least 15 m.
･
Never put your hands and feet near the
blade under the mower.
･
Remove the lock key before inspecting,
adjusting, cleaning, servicing, leaving
and storing the mower.
･
Cd Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
Explanation of general view
6-1. Lock key
7-1. Mowing height adjusting lever
8-1. Upper handle
8-2. Lower handle
8-3. Screw holes
8-4. Screw holes
9-1. Clamping nut
9-2. Lower handle
9-3. Upper handle
9-4. Screw holes
9-5. Screw
Model
Mowing width
No load speed
during operation
when stored
Net weight
Rated voltage
1,450 mm -1,490 mm x 460 mm x 950 mm -1,020 mm
490 mm - 500 mm x 460 mm x 810 mm
END016-2
Noise
The typical A-weighted noise level determined according
to EN60335:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Vibration
The vibration
determined according to EN60335:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
4
10-1. Holders
10-2. Cord
11-1. Holders
11-2. Cord
12-1. Screw
12-2. Clamping nut
12-3. Upper handle
12-4. Lower handle
16-1. Front grip
BLM430 / LM430D
430 mm
-1
3,600 min
17.9 kg
D.C. 36 V
BL3626 / BL3622A
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
) : 80 dB (A)
pA
) : 93 dB (A)
WA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s or less
h
2
ENG905-1
ENG900-1
vector sum)
ENG901-1