Busch-Jaeger 6480U-102 Betriebsanleitung Seite 97

Programming
Intermediate setting and slat angle
You can store an immediate setting for an awning or a slat
angle for a Venetian blind. This is possible, however, only
in manual mode (see chapter "Manual") and during
extending. You will have to switch back to automatic mode
after programming.
Programming of an intermediate setting
– Ensure that manual mode is active.
– Press
symbol ESO (end position top) appears in the display.
– Simultaneously press
– Press
and keep
– Save this position by pressing
– Now release
until the awning is fully retracted and the
until the desired position has been reached
pressed.
and
and for at least 3 seconds.
.
.
ENG 97