Automatic Mode - Busch-Jaeger 6480U-102 Betriebsanleitung

Operation
If the awning does not respond, the set wind value has
probably been exceeded. Wait until the wind has subsided.

Automatic mode

– Press the button <Auto> twice until operating mode
"Manual" is deleted in the display (see fig. 2 item 11).
The awning is controlled according to the set values for
rain, light, wind and temperature.
– When the wind value has been exceeded the symbol
"Wind" flashes at the bottom right in the display and
the awning is being retracted.
– When the light value has been exceeded the symbol
"Sun" flashes at the bottom right in the display and the
awning is being extended.
Display example: Values that have
been exceeded flash in the display
(here displayed in grey).
ENG 79