Busch-Jaeger 6480U-102 Betriebsanleitung Seite 89

Programming
General information on programming
The adjustable values for sets "Thresholds" (wind, sun and
temperature) and times (pulse duration and delay times)
are activated via button <Prog>.
The following applies in general:
– Press the <Prog> button,
to start programming or
to exit the "current" programming process
– If you interrupt programming for more than five
minutes, the module changes back to the operating
mode activated previously together with the relevant
display.
– Entries must generally be confirmed with button
<Enter>; otherwise the previous values are retained.
– During programming you cannot execute manual
commands.
ENG 89
or