Busch-Jaeger 6480U-102 Betriebsanleitung Seite 57

Fig. 2
Legend to Fig. 2
Pos. 1:
Pos. 2:
Pos. 3:
Pos. 4:
Pos. 5:
Pos. 6:
Pos. 7:
Pos. 8:
Pos. 9:
Pos. 10:
Pos. 11:
Pos. 12:
Pos. 13:
"ESO" = End position top
Travel command ON is being carried out
and/or input value is being increased
Travel command OFF is being carried out
and/or input value is being reduced
Predefined light value has been exceeded
Predefined wind value has been exceeded
Programming of
a: times or b: thresholds or c: menus
two-digit wind value
two-digit light value
two-digit temperature value
"FREE" for programming
Manual mode or
Automatic mode
Measured force of rain
ENG 57