Fault Rectification - Busch-Jaeger 6480U-102 Betriebsanleitung

Fault rectification

Diagnosis
Motor does not
run:
Incorrect motor
rotation
Awning does not
extend fully:
Intermediate
setting cannot be
programmed:
Intermediate
setting cannot be
deleted:
Cause/Remedy
– Clamp in missing bridge L-P
(see fig. 4)
– Switch over incorrect terminal
connection for
– Delete intermediate setting (see
chapter "Deleting an
intermediate setting/slat
position")
– Activate manual mode
– Retract awning fully with
"ESO" appears in the display
– Delete old intermediate setting
– Activate manual mode
– Retract awning fully with
"ESO" appears in the display
ENG
and .
until
until
101