Beurer medical BC 19 Gebrauchsanweisung Seite 25

Permissible operating +10 °C to +40 °C, ≤ 85 % relative
conditions air humidity (non-condensing)
Permissible storage -20 °C to +55 °C, ≤85 % relative
conditions air humidity, 800-1050 hPa ambi-
ent pressure
Power supply 2 x 1,5 V
Battery life For approx. 250 measurements,
depending on the blood pressure
level and/or pump pressure
Accessories Instruction for use, 2 x 1.5 V AAA
batteries, storage box
Classification Internal supply, continuous oper-
ation, type BF applied part, IPX0,
no AP or APG
Technical information is subject to change without notifi-
cation to allow for updates.
• This unit is in line with European Standard EN 60601-
1-2 and is subject to particular precautions with regard
to electromagnetic compatibility (EMC). Please note
that portable and mobile HF communication sys-
tems may interfere with this unit. More details can be
requested from the stated Customer Service address
or found at the end of the instructions for use.
• This device is in line with the EU Medical Devices
Directive 93/42/EEC, the "Medizinproduktegesetz"
(German Medical Devices Act) and the standards
EN 1060-1 (non-invasive sphygmomanometers, Part 1:
General requirements), EN 1060-3 (non-invasive
sphygmomanometers, Part 3: Supplementary require-
AAA batteries
ments for electro-mechanical blood pressure measur-
ing systems) and IEC 80601-2-30 (Medical electrical
equipment – Part 2 – 30: Particular requirements for the
safety and essential performance of automated non-
invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical
purposes, it must be regularly tested for accuracy by
appropriate means. Precise instructions for checking
accuracy may be requested from the service address.
25