Throttle Cable Adjustment - Yamaha YZ426F Handbuch

2

THROTTLE CABLE ADJUSTMENT

1
3 - 10
EC35A001
THROTTLE CABLE ADJUSTMENT
1. Check:
Throttle grip free play a
G
Out of specification → Adjust.
Throttle grip free play a:
3 ~ 5 mm (0.12 ~ 0.20 in)
2. Adjust:
Throttle grip free play
G
Throttle grip free play adjustment steps:
Remove the throttle cable cap 1 and
G
throttle cable cover 2.
NOTE:
Before adjusting the throttle cable free
G
play, the engine idle speed should be
adjusted.
When the motorcycle is accelerating,
G
throttle cable #1 3 is pulled and throttle
cable #2 4 is pushed.
1st step:
Loosen the locknuts 5 on throttle cable #2.
G
Adjust the free play by changing their
G
tightening position.
2nd step:
Loosen the locknuts 6 on throttle cable #1.
G
Adjust the free play by changing their
G
tightening position.
Tighten the locknuts.
G
WARNING
After adjusting, turn the handlebar to
right and left and make sure that the
engine idling does not run faster.
Install the throttle cable cover and throttle
G
cable cap.
INSP
ADJ